Difference between revisions of "Wheel cylinders"

From MoparWiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[Category:Car Parts]]
 +
[[Category:Terminology]]
 
{{Template:Openx}}
 
{{Template:Openx}}
need a contributor to help out here
+
 
 +
==Definition==
 +
A wheel cylinder is a component in a [[drum brake]] system. It is located in each wheel and is usually at the top, above the shoes. Its responsibility is to exert force onto the shoes so they can contact the drum and stop the vehicle with friction. What connects these wheel cylinders to the shoes are usually small rods shaped like a birds beak. It is very similar to a [[master cylinder]] and functions in pretty much the same way, consisting of just a simple little plunger on the inside. On older vehicles these will begin to leak and hinder the performance of the brakes, but are normally inexpensive and easy to replace.
 +
 
 +
The wheel cylinder consists of a [[cylinder]] that has two [[pistons]], one on each side. Each piston has a rubber seal and a shaft that connects the piston with a brake shoe. When brake pressure is applied, the pistons are forced out pushing the shoes into contact with the drum. Wheel cylinders must be rebuilt or replaced if they show signs of leaking.
  
 
{{Template:BottomWiki}}
 
{{Template:BottomWiki}}

Latest revision as of 18:17, 30 March 2020




Definition

A wheel cylinder is a component in a drum brake system. It is located in each wheel and is usually at the top, above the shoes. Its responsibility is to exert force onto the shoes so they can contact the drum and stop the vehicle with friction. What connects these wheel cylinders to the shoes are usually small rods shaped like a birds beak. It is very similar to a master cylinder and functions in pretty much the same way, consisting of just a simple little plunger on the inside. On older vehicles these will begin to leak and hinder the performance of the brakes, but are normally inexpensive and easy to replace.

The wheel cylinder consists of a cylinder that has two pistons, one on each side. Each piston has a rubber seal and a shaft that connects the piston with a brake shoe. When brake pressure is applied, the pistons are forced out pushing the shoes into contact with the drum. Wheel cylinders must be rebuilt or replaced if they show signs of leaking.


Random Page | Longest Wikis | Oldest Wikis | Newest Images | Newest Wikis | List of Categories | List of Every Freakin Wiki



Register to Edit
It takes less than 5 minutes to request registration for editing, and we try to approve within 24 hours. Click the Register Link in the Top Bar.
MoparWiki Help
While editing Wikis may at first glance appear a little overwhelming, it really isn't. You will find this site's HELP (link found in the sidebar) to be very strong and easy to understand. The best way to start is with small edits and working on your user page -- and you will become a Pro in no time.